Skip to content
IT THINKS!
BUILD YOUR OWN GPU WIKI
Home
Guides
Beginner Guide
How to Cast a Chip
Timing Trace Guide
CPU Assembly
Puzzle Solutions
4-Bit Adder
Register Puzzle
Matrix Multiplication
Demo & Sandbox
Demo Save Transfer
Sandbox Mode
Community
Community Puzzles
Search the wiki
Loading guides…
↑ ↓ to navigate · Esc to close
Back to home
IT THINKS! Guides
Get started with logic circuits, then explore the tools and puzzles in IT THINKS!
Guides
Beginner Guide
Start with the NAND contract in the Logic Trainer. Place a NAND gate from the Factory, wire inputs a and b into it, and connect its output to y. Run the truth-table test. The expected output is 0 when both inputs are 1 and 1 for the other three input pairs.
How to Cast a Chip
Use the live test bench to verify your circuit against the expected outputs. Cast a working design into a reusable chip and place that chip in later circuits to reuse the design.
Timing Trace Guide
In the workbench, use Watch Selected Outputs to add signals to the timing trace. Follow their values across ticks to see when an input changes and when that change reaches the output.
CPU Assembly
The campaign moves from logic and memory into a programmable CPU. It uses a compact assembly language to run programs on the hardware you build and later lets you run a kernel across multiple cores.
Puzzle Solutions
4-Bit Adder
A 4-bit adder can chain four full adders from least to most significant bit. Send the carry output of each stage to the carry input of the next. When checking the design, try an input that makes the carry travel through several stages, such as 0111 plus 0001.
Register Puzzle
Registers are part of the game's progression into memory. Use the test bench to check that stored outputs stay stable between writes and change when the register accepts new input.
Matrix Multiplication
The campaign introduces matrix multiplication after parallel computing. Each output entry comes from multiplying one input row by one input column and summing the products.
Demo & Sandbox
Demo Save Transfer
Progress carries over automatically from the Steam demo. For the browser demo, transfer your progress using a save file.
Sandbox Mode
The free bench supports up to 4,000 parts. You can build interactive devices with components such as buttons, displays, and a buzzer, then try your device on the front panel.
Community
Community Puzzles
You can play puzzles published by other players and publish puzzles of your own. Devices built on the free bench can also be shared by link and tried in a browser.